Remote control transmitter Users manual details for FCC ID MVUDRC01 made by MotorGuide. Document Includes User Manual Digital Remote Owner's Manual. Audio and Video Compatibility Voice Dialer Security Console The IR34A IconRemote used in conjunction with the RE549 Half Powermid gives you control of Audio and Video components - even if they are in a different room from the remote. The IR34A IconRemote used in conjunction with the PS561 (DS7000) security console gives you the ability to. Remote Control Transmitter Exhibit D Users Manual per 2 1033 b3 details for FCC ID HBW1662 made by Chamberlain Group Inc, The. Document Includes User Manual 114A2504 Clicker.
Advertising
50
51
Voice Dialer Security Console
The IR34A IconRemote used in conjunction
with the PS561 (DS7000) security console gives you the ability to control your home security directly from your remote.
Description:
To set up your remote for the PS561 do the following:
•
Press the Home key.
•
Press the Setup Side Key.
•
Press the X10 Side Key.
•
Press the Add/Edit Side Key.
•
Use the Side key to select the room that you
want to associate the security device.
•
At the “add and X10 device!” screen, press
the OK key.
•
Use the Side Key to Pick Device.
•
Press the Security Side Key.
•
Press the Side Key to select the DS7000.
•
At the Security Options screen, press the
Side Key to SetPassword.
•
Enter your 4 digit security code using the
alphanumeric keys. (This is your choice; do not forget your security code.)
•
Press the Side Key for the Set Console Link.
•
Following the screen instructions to set
your console to program mode by pressing and holding the OK key until the console chimes. (Note: Make sure that the PS561 slide-switch is set to “Install,” top-right corner on the front panel.)
•
Press the Side Key for Done.
To use the PS561 do the following:
•
Press the Mode key.
•
Press the X10 Side Key.
•
Select the room that has the security console
by pressing the Side Key.
•
The options screen for the security console
appears. Use the Side Key for the option that you want to use.
•
The Enter Code screen appears. Enter your
password to execute the your choice.
•
Press Back to leave the Enter Code screen.
The IR34A IconRemote used in conjunction with the
RE549 Half Powermid gives you control of Audio and Video components - even if they are in a different room from the remote.
The Half Powermid allows you to extend the distance you can
use your remote. You will be able to hide the RE549 from sight and still control your TV or other electronic devices through entertainment centers, cabinet doors, from another room, etc. The transmitter will receive the RF commands and send them using IR through the transmitter cable included with the your package.
Description:
The idea on how to do this is shown in the fi gure below. Follow these basic steps: • Plug the Powermid Receiver (Model RE549) into a 120V AC
outlet in the room where your TV, VCR, stereo, etc., that you
want to control is located (up to 20 feet away from what you want to control). Point the front of the Powermid Receiver towards the unit you want to control.
• Fully extend the antenna on the Powermid.
• (Optionally) plug the IR extender cable into the back of the
RE549 and attach the IR emitters on the cable to the front of
up to two A/V devices that you want to control.
Audio and Video Compatibility
• Press any key on the remote. The RE549 receives the Radio
Frequency (RF) signals and blasts the IR signals from its front
face, or optionally through the RX569 emitter cable to control your IR compatible devices (TV, VCR, CD, etc.).
Note: You can add more RE549’s to control A/V equipment in
more than one room.
Advertising
Popular Brands
Popular manuals
Advertising
14
15
Setting Up X10 Devices
The IR34A IconRemote - coupled with other X10 Home
Automation Modules - gives you the ability to control everything electrical in your home. Once you set up your remote, you can control most any electrical device from the remote, using the keys that have been confi gured for X10 Home Automation Modules.
Description
X10 Home Automation systems use three types of signals - Infrared (IR), Radio Frequency (RF), and Power Line Carrier (PLC). The IR34A remote can send either IR, RF signals, or both, depending on how you’ve set up the remote to control different equipment. Ir Remote Control Extender
Setting Up Your Remote to Send RF commands
When the IR34A is in X10 mode, it transmits RF commands to
X10 devices that respond to RF signals. The following example describes how to use RF to control a TV (so you can control it from anywhere in your home). Keep in mind that when you set up a non RF device to be controlled by RF signals, you need to use a device like the RE549, which converts the RF signals it receives back in to IR signals to turn the TV on or off (see pages 50 and 51 for more details).
• Press Home.
• Select Setup using the Side Key. • At the following screen select More
using the Side Key.
Ir34a Remote Control Transmitter User Manual Software
• At the following screen select Wireless.
• The Mode screen appears; select the
Device you want to set for RF by
pressing its Side Key. (In this example, it’s TV.) The RF symbol appears on the TV icon. Press OK to Save.
Note: After following the above steps,
when you make selections in TV Mode, you will notice that the transmit signals at the bottom of the screen are now Green. This indicates that the remote is sending RF and IR to the TV. If the signals are in Red, it means that the remote is transmitting IR only.
(6)
(7)
Setting Up Your Favorites, cont.
Note: “Triple tap” name entry works in a similar fashion to text
entry on a cell phone. Tap each numeric key to cycle through ALL caps, numbers, and lower case letters. E.g., repeatedly pressing the number 2 key cycles through A, B, C, 2, a, b, c. Pressing the 9 key cycles through W, X, Y, Z, 9, w, x, y, z. A “space” can be selected with the 0 (zero) key. The number 1 key selects 1 . @ ? ! - & and :. You can backspace an entry with the key to the left of the 0 (zero) key. Press OK to confi rm your new name.
You can continue to add favorites, up to
a total of 10 (You can add more later; see page 38.) At screen (6) you choose if the favorites you just set up are stored in the “His” group or the “Hers” group. Later you can set up favorites in lots of different Groups, not just His and Hers. Selecting His takes you to screen (7) showing that you now have NBC set as the fi rst favorite in the His Group (at the location next to Side Key K1), as well as any other favorites you set up. (Note, you can reorder, i.e., move the positions of the logos later.) Ir34a Remote Control Transmitter User Manual Instructions
When you’re fi nished setting up your
favorites, press the HOME key (located to the left below the screen) to go back to the Home screen.
At any time you can press the
FAVORITE key and then select His, or press the His key at the top left hand side of the remote to go to screen (7) above. Pressing the key next to the NBC logo will (in this case) change the channel on your Cable box to NBC (in this case channel 4).
Note: See page 19 “Using the Remote”
for related His and Hers features.
Advertising
Ir34a Remote Control Transmitter User Manual Free
Popular Brands
Ml L3 Remote Control Transmitter
Popular manuals
Comments are closed.
|
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |